Power supplies

Tycon TP-POE-HP-48G is a gigabit power supply/poE inserter that supports up to 50W DC PoE output and is designed to power high-volume devices. This source supports power on pins 4.5 (V +) and 7.8 (-). ; ; Properties: ; Powering the device...

Gigabit PoE Injector/Splitter with LED for power. Injects or splits DC power on all 8 wires. 3678(-) 1245(+) Wire terminal connector. Black Color. 2.25A. Can be used for Starlink DC powering with slight cable/pinout modification ( this or this )!; Feat...

Tycon TP-DCDC-4848G-HP is HP voltage converter with passive Poe-out output (PIN 4.5 +, pin 7.8-). Input voltage 36-72VDC is regulated at 56V/0.9A. The source has two insulated inputs for redundant power supply. Use: 48V battery systems; Wireless ...

Passive PoE.H 1Gb passive module with overvoltage protection and DIN rail protection ; ; Operating voltage: 8-56V via a removable connector ; Output current: 1.4A max. (0.35A/500mA fuse protected) ; Operating temperature:-30-+ 60 ° C ; Local...

A professional panel that integrates 16 passive PoE injectors and is therefore suitable for powering up to twelve devices with an integrated PoE extractor. This is a great solution for powering wireless devices, IP phones, IP cameras, etc. If the power...

The 802.3AF/AT/BT POE device with 10 GBPS support for a device with an output of up to 60W.

DC plug-in power module, with two fuses 3 and +24 V settings, or-48 V for each output separately.

Passive PoE module 1 Gbps, 83 W, IP20, plug-in, with a return fuse, with overvoltage protection 5 ka

Compact 48V source with DIN molding and up to 180W.

Tycon Systems TP-POE-10G-BT60 is a professional gigabit PoE++ injector of the IEEE 802.3bt Type 6 standard, designed for powering energy-intensive network devices such as PTZ cameras, Wi-Fi 7 access points, or industrial switches. The unit supports a 1...

24V source with up to 120W, designed to power multiple active elements.

Gigabit Poe Injector from microtics to power any routerboard or other device with integrated PoE splitter. Injector supports 9-48 V adapters (max. 2A) and allows communication at 1 Gbps.

Cycle life is approximately 800 cycles at 50% DoD and 25 ° C. when operating the backup power supply, charging voltage 13.5-13.8 V at a temperature of 25 ° C T1

PoE-PowerTab is a unique tool when you need to monitor or test PoE voltage, extract PoE switches or injectors. PowerTao is equipped with 2 cable clamps. ; ; ; Properties ; Max. current: 2A ; Max. wire diameter: 12AWG (2 mm) ; Size: ; ;

Tycon TP-DCDC-4848GD HP's HP-voltage converter with PoE port with power by 802.3. Input voltage 36-72VDC regulated at 56V/0.625. Source has two isolated inputs for redundant power supply. ; ; Application: ; 48V battery systems ; Wireles...

MikroTik CSS610-8P-2S+IN is a manageable PoE switch with 8 gigabit ports and 2 SFP+ bays supporting 10 Gbps transmission. PoE-out with a total budget of 140 W is supported on all ports.

24V power supply for WRAP, RB (24V/switched)

POE Injector to power remote devices using a network (UTP) cable.

Properties: ; Input voltage 9-36VDC, output voltage 48V IEEE 802.3af ; IEEE 802.3af Injector ; Dual Power Inputs for 2 Power Supply (Reducing Power) ; Integrated gigabit PoE feed ; Protection against short circuit, overvoltage ; Made in ind...

The panel 19"rack integrates 12 Gigabit shielded active POE injectors with a power range of 24-57V. Home ; Universal solution for remote power greater number of active elements with integrated extractor over UTP cabling. Home ; Over-current protectio...

Tycon TP-DCDC-4856G-VHP is a specially designed DC/DC converter with an integrated PoE injector for powering microwave units and other systems that require High Power passive PoE power supply, e.g. PTZ security cameras. The source uses two power channe...

Power supply with DIN mounting, 48V output and 120W output.